AFTER DIAG FOUND FRONT Y-PIPE FLEX SECTION ROTTED AWAY CAUSING NOISE CONCERNS, WE ALSO FOUND BOTH REAR MUFFLERS HAVE SLIGHT LEAKS AT THE SEAMS FROM RUSTED AND ROAD SALT. CUSTOMER ADVISED IF NOISE SHOULD OCCUR WILL NEED NEW MUFFLERS.
INSTALL FRONT EXHAUST Y PIPE
Jim C. gave our service a 5 star review on 5/29/2024
VERIFIED CUSTOMERS CONCERN AND FOUND CLUTCH ON AC COMPRESSOR WORN CAUSING KNOCKING NOISE.REPLACED COMPRESSOR EVACUATED AND RECHARGED SYSTEM NOW AC IS RUNNING AT 40 DEGREES INSIDE THET THE CABIN
A/C COMPRESSOR – Remove & Replace – 6.2L Eng w/o Skid Plate – [DOES NOT include Air Conditioning System recover, evacuate and/or recharge.]
Service air conditioner. Check condition of all belts and lines. Evacuate and recharge with reclaimed R-134. Test system performance and add dye tracer for possible future leaks in system.
Mike B. gave our service a 5 star review on 5/29/2024
Inspected vehicle on hoist and scanned for codes. Found multiple codes related to fuel system including P0201- P0206 cylinder 1-6 injector circuits open, P025A- fuel pump module control circuit open, and U0109- lost communication with fuel pump module. Inspected related circuits and connections and found fuse #27 melted in battery junction box located under hood. Researched and found TSB from manufacturer related to this condition, which involves relocating fuse #27 to a different location inside existing fuse box, and rewiring the circuits to accept a larger maxi fuse. Performed relocation procedure, cleared trouble codes, and found vehicle now starts and operates properly.
LABOR TO INSTALL AND WIRE FUSE BOX
Mitch B. gave our service a 5 star review on 1/12/2024
after diag found bearings inside alternator causing noise, also drive belt tensioner frozen / siezed and idler pulley making noise as well after checking.
VERIFIED CUSTOMERS CONCERN VIBRATION WHILE DRIVING. PUT VEHICLE ON RACK AND SPUN DRIVELINE. UPON INSPECTION FOUND FRONT LEFT CV AXLE WORN/DAMAGED CAUSING VEHICLE TO VIBRATE WHILE DRIVING. RECOMMEND REPLACING BOTH SIDES. REPLACED BOTH AXLES AND TEST DROVE VEHICLE. VEHICLE NOW DRIVES AS IT SHOULD AND NO MORE VIBRATION PRESENT.
AXLE SHAFT ASSEMBLY – Remove & Install or Remove & Replace – Both front cv axle shafts.
greg w. gave our service a 5 star review on 11/8/2023