Welcome to Chicago Driveline Inc, your car service in Alsip, IL!
If you’re looking for auto repair in Alsip, IL, you’ve found us. Here at Chicago Driveline Inc we work hard to earn your trust and loyalty. We know how important it is to find a Alsip car service you can rely on, so your satisfaction is our top priority each and every day.
Here at Chicago Driveline Inc we understand what makes customer service truly outstanding. You will feel the difference exceptional customer care makes when you work with us. We know auto repair in Alsip offers you lots of choices, and we aim to provide the kind of caring customer service that will bring you back.
Our professional automotive service offers you years of combined expertise from our well-trained technicians. We treat our auto repair professionals well because we value their skill and can-do attitude. We know our team sets us apart, saving you time and money, not to mention worry. When it comes to auto repair in Alsip, we are totally confident that Chicago Driveline Inc is the best option in town!
Over 150 Years combined Experience in Automotive & Driveshaft Repairs
Address
Chicago Driveline Inc
11500 S Central Ave
Alsip, IL 60803-3417
(708) 385-1900
Shop Hours
Mon-Fri: 8am-4:30pm
Sat-Sun: Closed
Directions
Payment Types
Affiliates & Certifications
The Absolute Best Car Service in Alsip, IL
What sets Chicago Driveline Inc apart from all of the others in Alsip, IL?
Trust: When it comes to auto repair in Alsip, IL, it’s all about earning loyalty and trust by doing our very best every day. We are determined to earn and keep your trust.
Talent: At Chicago Driveline Inc, you can rest easy knowing that our highly-skilled, experienced auto service professionals are handling your car. Our technicians bring years of experience, skill, and education to the Alsip auto repair table.
Time: We take the time we need to provide you with top quality car service in Alsip, IL, and we take the time to talk to you about what that means. We listen to you so we understand your needs and goals for your auto repair.
About Chicago Driveline Inc Alsip, IL
For years Chicago Driveline Inc has been there for the people of Alsip. We love what we do, and that basic fact fuels our business. We are dedicated to our customers, and that’s why they stick with us—the best auto repair Alsip has to offer.
Our family of technicians and service staff sees their work here at Chicago Driveline Inc as more than a job. It’s their vocation and livelihood. Each member of our team is invested in your satisfaction.
Chicago Driveline Inc was founded on the basic idea that everyone deserves respect. It is our mission to treat each person that comes through our door with dignity and sensitivity. We believe this attention to detail has paid off by providing us with our loyal, friendly family of customers. That’s what makes Chicago Driveline Inc the best car service in Alsip!
Are you ready to experience the best Alsip car service available? Please give us a call or make an appointment here.
Recently Serviced Vehicles
-
2012 Chevrolet Silverado
Mileage194,816Service Date11/15/2024Services Performed- FOUND BAD MAIN BATTERY INSTALLED NEW SYSTEM ALL GOOD NOW.
- INSTALL MAIN BATT
Tony D. gave our service a 5 star review on 11/17/2024 -
2008 Chevrolet Tahoe
Mileage264,899Service Date11/12/2024Services Performed- Remove the needed shields and covers to gain access as needed to the rear differential cover bolts and cover. Clean the gasket sealing surfaces and cover. Clean out the rear differential and reassemble with new heavy duty sealer and/or gasket. Fill with New fluid.
- FOUND OLD HANGER CLAMPS ON EXHAUST PIPE REMOVED, TEST DROVE NO NOISE HEAD DURING TEST DRIVING..
DESMOND S. gave our service a 5 star review on 11/14/2024 -
2013 Jeep Grand Cherokee
Mileage118,645Service Date10/29/2024Services Performed- CK NOISE FROM REAR DIFF
- AXLE ASSEMBLY – Remove & Replace – w/Electronic Limited Slip Differential – [DOES NOT include wheel alignment. Includes: Additional time for use of scan tool to perform this procedure.]
Ed F. gave our service a 5 star review on 11/7/2024 -
2009 Nissan Altima
Mileage107,539Service Date10/24/2024Services Performed- CK FRT END MAKING NOISE ON BUMP, ALSO WHEN TURNING WHEELS
- Changed Motor Oil & Replaced Filter, Added 4 QTS Premium Motor Oil, Lube Chassis, Check all Fluid Levels
- STABILIZER BAR LINK ASSEMBLY – Remove & Replace – Both
John C. gave our service a 5 star review on 11/6/2024 -
2005 Jeep Wrangler
Mileage16,726Service Date11/1/2024Services Performed- Changed Motor Oil & Replaced Filter, Added 5 QTS Synthetic Motor Oil, Lube Chassis, Check all Fluid Levels
- INSTALL WIPERS
- SPARK PLUGS – Remove & Replace – In-Line6
- AFTER CHECKING COOLANT FOUND CLEAN AND GOOD FOR -40 BELOW.
Dan L. gave our service a 5 star review on 11/2/2024 -
2004 Jeep Wrangler
Mileage194,907Service Date10/30/2024Services Performed- Right rear axle bearing and possible axle
- VERIFIED PINION SEAL LEAKING. REPLACED SEAL AND NO MORE LEAKS AT THIS TIME.
- WHEEL BEARING / AXLES – Remove & Replace – Rear,Both
- PINION SHAFT SEAL – Remove & Replace
- Remove the needed shields and covers to gain access as needed to the rear differential cover bolts and cover. Clean the gasket sealing surfaces and cover. Clean out the rear differential and reassemble with new heavy duty sealer and/or gasket. Fill with New fluid.
Tom P. gave our service a 5 star review on 10/30/2024 -
2010 Toyota Corolla
Mileage126,600Service Date10/18/2024Services Performed- Changed Motor Oil & Replaced Filter, Added 5 QTS Synthetic Motor Oil, Lube Chassis, Check all Fluid Levels
KELLY C. gave our service a 5 star review on 10/18/2024 -
2008 Chevrolet Tahoe
Mileage263,870Service Date10/15/2024Services Performed- CHECK NOISE(SCRAPING) ON ACCEL…CUST STATES VERY NOTICEABLE
- Customer Approves Removal Of Rear Cover To Inspect Ring/Pinion And Condition Of Carrier.
- RING GEAR & PINION – Remove & Replace
- BARELY ANY FUEL IN TANK!
- When installing a new ring and pinion it is recommended to properly break in the new components. The proper break in procedure will extend the life of the components and help with the prevention of premature failure usually caused by extreme heat. Although your new ring and pinion is “Lapped” from the factory for smooth quiet operation, they will still need to be broken in once they have been installed. A new ring and pinion will initially run hotter when new and can cause extensive damage if the temperature exceeds ideal operating conditions for an extended period of time. The suggested break in procedure is as follows, The first drive with the new ring and pinion should be under normal driving conditions (No hard starts, No racing, No off-roading, No towing and not at Highway speeds). The vehicle should be driven 15-20 minutes around town, normal stop and go driving. Then you should let the axle assembly “Completely Cool” (this will allow the gear oil to cool down so it does not reach temperatures that will break down the oil, causing loss of protection) Repeat the 10-15 minute drive and cooling off period 2-3 times Then you will want to drive on the highway and repeat the process at least 2 times abiding by local speed laws but not exceeding 65 MPH, be sure to let the axle assembly completely cool between drives (very important). Lastly you will want to change the gear oil after the initial 500-1000 miles and your gears are broken in correctly. Note: If vehicle will be used for towing, repeat the break in procedure the first time it is used to tow. Follow the factory service manual for recommended differential service intervals unless the vehicle is used in extreme conditions on a regular basis, you will want to service the differential more often. (Recommended gear oil is an 80W-90 or 85W-140, Non-Synthetic, GL5 grade or Higher, Name Brand Oil. Please note extreme weather conditions may require alternative weight oil so be sure to consult a local mechanic or lube technician for recommendations) <<<NOTE OR IMPLIED.>>> A restock fee of 15% will be charged on all authorized returns. Aftermarket ring & pinion sets are designed primarily for strength not for silent operation. With this in mind some aftermarket ring & pinion sets suffer from a gear whine.
DESMOND S. gave our service a 5 star review on 10/15/2024 -
2013 Ford Edge
Mileage137,204Service Date10/15/2024Services Performed- CK ENG LIGHT ON RUNS ROUGH..Another Shop Cleared The Codes
- Changed Motor Oil & Replaced Filter, Added 5 QTS Synthetic Motor Oil, Lube Chassis, Check all Fluid Levels
- REPLACED 3 COIL'S ON FIREWALL SIDE
Bruce O. gave our service a 5 star review on 10/15/2024 -
2014 Ford Explorer
Mileage109,612Service Date9/26/2024Services Performed- after test driving and diag found right frt cv axle bearing damaged causing noise issue.
- AXLE SHAFT ASSEMBLY – Remove & Install or Remove & Replace – Front Right Side
Jim C. gave our service a 5 star review on 9/26/2024 -
2009 Chevrolet Avalanche
Mileage188,651Service Date9/16/2024Services Performed- Vehicle has suspension conversion kit installed elsewhere, wires need to be grounded reason for suspension lights to come on dash. Suggest customer take back to shop that installed kit. Air ride system was removed from vehicle.
- AFTER DIAG FOUND LEFT FRONT HUB BEARING WSS BAD, ALSO HAD CODE FOR EBCM BRAKE MODULE, POSSIBLY MAY NEED DEALER FOR REPROGRAMING. AFTER REPLACING EBCM, IF LIGHT COMES BACK ON.
- Changed Motor Oil & Replaced Filter, Added 4 QTS Blended Motor Oil, Lube Chassis, Check all Fluid Levels
- INSTALL L/FRT WHEEL BEAR
- Rotate Tires…….Front To Rear
Willie L. gave our service a 5 star review on 9/16/2024